Máy hàn tig TIG ACDC 500DSP
Máy hàn tig TIG ACDC 500DSP

Máy Hàn Tig ACDC 500DSP

Liên hệ

Product by: Jasic
Categories: ,

Description

TIG ACDC 500DSP

Parameters:

ModelItem Unit TIG315PACDC(J19)
TIG500PACDC(J12)
TIG315PACDC(J55)
Common parameter
Input voltage/frequency V/Hz Three-phase 380V AC，50/60Hz
Input voltage range V 300～420 300～420 300～420
Recommended fuse capacity A 40 40 40
Rated output A/V 315/32.6 TIG500/30，MMA400/36 315/32.6
Rated no-load voltage V 66 66 66
Rated duty cycle % 60 60 60
Power factor COSφ≥0.85 COSφ≥0.85 COSφ≥0.85
Efficiency % η≥85 η≥85 η≥85
Dimensions mm 600×323×751 600×323×751 600×320×615
Weight Kg 53 54 43
Insulation class H H H
Protection class IP21S IP21S IP21S
Implementation standard GB15579.1～2004
MMA parameter
Welding current range A 10～315 10～400 10～315
Arc-force adjustment range A/ms 0～10（0~100A/ms，absolute maximum: 250A）
Arc starting current range A 10～320 10～410 10～320
Arc starting time range S 0～1 0～1 0～1
Arc stopping voltage adjustment range V 30.0～80.0 30.0～80.0 30.0～80.0
AC MMA parameter
Welding current range A 20～315 20～400 20～315
AC frequency Hz 50（not adjustable）
AC balance 1:1（not adjustable）
TIG parameter
Pre-flowtime S 0～15.0 0～15.0 0～15.0
Post-flow time S 0～20.0 0～20.0 0～20.0
TIG operation mode 20 modes(16 fixed modes, and 4 programmable modes)
Arc starting current range A DC:5～320

AC:20~250

 

 DC:5～510

AC:20~250

 

 DC:5～320

AC:20~250

 
Arc maintaining current range A
Upslope time S 0.1～99.9 0.1～99.9 0.1～99.9
Downslope time S
DC welding current range A 5～320 5～510 5～320
Pulse peak current adjustment range A
Pulse base current adjustment range A
Pulse frequency range Hz 0.1～400 0.1～400 0.1～400
Pulse duration ratio % 1～99 1～99 1～99
AC peak current adjustment range A 20～320 20～510 20～320
AC frequency range Hz 20～70 20～70 20～70
AC balance adjustment range % 10～45 10～45 10～45

 

 

x