Mô tả
Máy Cắt Plasma LGK 60
Features:
* Feed-back circuit is controlled by advanced IGBT technology, output current is stable.
* Cutting current can be adjusted continuously from 20Amps to Max current, be able to meet the demands of different materials, thickness and cutting speed.
* Non-contact arc starting mode without HF, little interference to the nearby electronic equipment.
* Applicable to cut carbon steel, stainless steel, galvanized steel, copper and aluminium, etc.
* Input voltage is three phases 380V 15%。
*With protection functions of short phase, over or low voltage, overheat or low air pressure.
Parameters:
Model Item |
Unit | CUT-100(J78) | LGK-160(J47) | CUT-100(J71)/
CUT-100(J84) |
| Input power voltage/frequency | V/Hz | AC380V(three phases)±15% | ||
| Rate input power capacity | KVA | 19.6 | 32.5 | 19.6 |
| Output current range | A | 20-100 | 30-160 | 10-100/20-100 |
| Rated output voltage | V | 120 | 144 | 120 |
| No-load voltage | V | 350 | 400 | 314 |
| Duty cycle(25 ℃) | % | 100 | 60 | 80 |
| Weight | KG | 50 | 57 | 25 |
| Dimensions | mm | 670×335×633 | 670×335×633 | 530x270x430 |
| Arc-starting | S | HF | HF | NON-HF/HF |
| Max. Cutting thickness | mm | 50 | 60 | 40 |
| Gas flow | m3min | 0.16 | 0.2 | 0.16 |
| Insulation class | F | F | F | |
| Efficiency | % | 88 | 88 | 88 |
| Power factor(COSφ) | 0.76 | 0.82 | 0.76 | |
| Protection class | IP21S | IP21S | IP21S | |
