Mô tả
Máy Cắt Plasma LGK 60
Product Features:
1. Can cut metal plates in any customised routes.
2. Plasma cutting. Excellent for cutting carbon steel, stainless steel, aluminium and copper.
3. Widely used in steel structures, manufacturing industries and automobile maintenance.
4. Optimized cutting torch cooling mechanism, greatly lengthens the working life of the components.
5. Air pressure regulator allows operations under high gas pressure conditions.
6. Step-less adjustment for cutting current.
7. Contains electric circuit to protect against over-current, over-heat, over-voltage and short-voltage, safe to operate.
Main Parameters Table:
| Input voltage (V)： | 380 | Power factor： | 0.93 | Rated input current (A)： | 12 |
| No-load loss (W)： | 60 | Output current (A)： | 20-60 | Housing Protection grade： | IP21 |
| Rated output volt. (V)： | 104 | Rated output current (A)： | 60 | Insulation grade： | F |
| Max cttting thickness (mm)： | 25 | Duty cycle(%)： | 60 | Efficiency(%)： | 85 |
| Weight (kg)： | 19 | Dimensions (mm)： | 505×203×375 | ||
| Remarks： | Input voltage Frequency should be 50/60Hz | ||||
